Search

Flexible LED screen P3 for outdoor use
Flexible LED screen P3 for outdoor useFlexible LED screen P3 for outdoor useFlexible LED screen P3 for outdoor use

Flexible displays

Flexible LED screen P3 for outdoor use

Flexible module P3 for outdoor use: bends to a radius, holds on magnets. Columns, waves and rounded façades.

Model at a glance

Pixel pitch
P3
Brightness
5500–7800 cd/m²
Pixel density
105 625 dots/m²
Module size
320×160 mm
IP rating
IP 68
Refresh rate
≥3840 Hz
Power max/avg
650/220 W/m²

Price on request

Cost depends on area, mounting structure and installation height. Send the dimensions and we will return a quote with a drawing.

Request a price

Flexible LED screen P3 for outdoor installation. The module on a flexible PCB bends to a radius — columns, waves and rounded façades are all possible. Pixel density 105 625 dots/m², brightness 5500–7800 cd/m².

Where it is used

  • city advertising at intersections and squares
  • shopping and business centre façades
  • petrol stations, car dealerships and roadside sites
  • information screens for akimats, railway stations and airports

Viewing distance

The minimum comfortable distance is about 3 m, and the main viewing zone is 3–9 m. The rule of thumb is simple: the distance in metres roughly equals the pixel pitch in millimetres. Closer than that the image breaks up into dots; further away the extra detail is wasted and a coarser pitch is the better buy.

Construction and servicing

The screen is built from 320×160 mm modules on a steel frame. The size is a multiple of the module, so the overall dimensions fit the opening almost exactly. Weight — 465 g (module).

Ingress protection — IP 68: the screen withstands direct rain, snow and hose-down cleaning. Operating temperature −40…+50 °C.

The module is built on a flexible PCB: it bends to a radius and holds on magnets — cylinders, waves, rounded corners and screens curved around a column are all possible.

Power and load

Peak draw is 650 W/m² (a white field at full brightness); with real content it is about 220 W/m². For a 6×3 m screen (18 m²) that means roughly 11.7 kW at peak and 4.0 kW in normal use. Power supply 110V~240V. In the technical specification we size the power lines by the peak rather than the average — otherwise the breaker trips on a white frame.

What the delivery includes

  • modules, power supplies, receiving cards and cabling;
  • a video processor — chosen for the screen resolution so that there are enough ports with headroom to spare;
  • the supporting steel structure to suit the mounting location;
  • installation, commissioning and brightness tuning for the site;
  • operator training and handover of the firmware files;
  • warranty and service — a stock of modules and power supplies is held in Almaty.

We work out the exact price from your dimensions: it depends on the area, the mounting structure, the installation height and the control kit. Send us the size of the opening and a photo of the location and we will come back with a quotation and a layout drawing.

Full specification

Pixel pitch3.076 (mm)
Brightness5500–7800 cd/m²
Pixel configurationSMD1415
Module size (W×H)320×160 mm
Weight465 g (module)
Pixel matrix per panel104×52 pixels
Pixel density105 625 dots/m²
Refresh rate≥3840 Hz
Greyscale14–16 bit
Scan type1/13
Colour16.7 million colours (3-in-1 RGB)
Viewing angle (H/V)140/140 deg
Ingress protection (front/rear)IP 68
Power consumption (max/average)650/220 W/m²
Input voltage (AC)110V~240V
Operating temperature−40…+50 °C
Operating humidity10 %~95 %
Signal compatibility (with video processor)AV, S-Video, VGA, DVI, HDMI, SDI, DP

A turnkey screen: quote, installation, launch.

Send us the dimensions and location — a quote today. WhatsApp around the clock.