LED screen P2.5 for outdoor use — 960×960 mm cabinet

LED screen P2.5 for outdoor use. Pixel density — 160 000 dots/m², brightness 5500–7800 cd/m², refresh rate ≥3840 Hz — the image does not flicker on camera. Built to fit your opening and supplied with a video processor, installation and commissioning.

Where it is used

• shop windows and entrance areas where the viewer stands two or three metres away
• façades in pedestrian zones and on narrow streets
• car dealerships, petrol stations and banks — the image reads well up close
• screens under canopies and on ground floors

Viewing distance

The minimum comfortable distance is about 2 m, and the main viewing zone is 2–8 m. The rule of thumb is simple: the distance in metres roughly equals the pixel pitch in millimetres. Closer than that the image breaks up into dots; further away the extra detail is wasted and a coarser pitch is the better buy.

Construction and servicing

The screen is assembled from 960×960 mm cabinets. Weight — 25 kg (cabinet 960×960 mm). Each cabinet arrives fully assembled from the factory — the modules, power supplies and receiving card are already inside, and on site the cabinets are simply joined together.

Ingress protection — IP 68: the screen withstands direct rain, snow and hose-down cleaning. Operating temperature −40…+50 °C.

Power and load

Peak draw is 650 W/m² (a white field at full brightness); with real content it is about 220 W/m². For a 6×3 m screen (18 m²) that means roughly 11.7 kW at peak and 4.0 kW in normal use. Power supply 110V~240V. In the technical specification we size the power lines by the peak rather than the average — otherwise the breaker trips on a white frame.

What the delivery includes

• fully assembled cabinets — the modules, power supplies and receiving cards are already installed;
• a video processor — chosen for the screen resolution so that there are enough ports with headroom to spare;
• the supporting steel structure to suit the mounting location;
• installation, commissioning and brightness tuning for the site;
• operator training and handover of the firmware files;
• warranty and service — a stock of modules and power supplies is held in Almaty.

We work out the exact price from your dimensions: it depends on the area, the mounting structure, the installation height and the control kit. Send us the size of the opening and a photo of the location and we will come back with a quotation and a layout drawing.