LED screen P0.93 for indoor use — 600×337.5 mm cabinet

LED screen P0.93 for indoor use. Pixel density — 1 137 778 dots/m², brightness 600 cd/m², refresh rate ≥3840 Hz — the image does not flicker on camera. Built to fit your opening and supplied with a video processor, installation and commissioning.

Where it is used

• situation rooms and dispatch centres — the operator sits a metre and a half away
• TV studios and film stages: the high refresh rate keeps banding off camera
• executive meeting and presentation rooms
• premium reception areas and showrooms

Viewing distance

The minimum comfortable distance is about 1 m, and the main viewing zone is 1–3 m. The rule of thumb is simple: the distance in metres roughly equals the pixel pitch in millimetres. Closer than that the image breaks up into dots; further away the extra detail is wasted and a coarser pitch is the better buy.

Construction and servicing

The screen is assembled from 600×337.5 mm cabinets (die-cast aluminium alloy). Weight — ≈4.3 kg (cabinet 600×337.5 mm); module 140 g. Each cabinet arrives fully assembled from the factory — the modules, power supplies and receiving card are already inside, and on site the cabinets are simply joined together.

Ingress protection — IP40 (indoor version), indoor version.

Power and load

Peak draw is 300 W/m² (a white field at full brightness); with real content it is about 100 W/m². For a 6×3 m screen (18 m²) that means roughly 5.4 kW at peak and 1.8 kW in normal use. Power supply 220V ±10 %. In the technical specification we size the power lines by the peak rather than the average — otherwise the breaker trips on a white frame.

What the delivery includes

• fully assembled cabinets — the modules, power supplies and receiving cards are already installed;
• a video processor — chosen for the screen resolution so that there are enough ports with headroom to spare;
• the supporting steel structure to suit the mounting location;
• installation, commissioning and brightness tuning for the site;
• operator training and handover of the firmware files;
• warranty and service — a stock of modules and power supplies is held in Almaty.

We work out the exact price from your dimensions: it depends on the area, the mounting structure, the installation height and the control kit. Send us the size of the opening and a photo of the location and we will come back with a quotation and a layout drawing.