Search

Media façade P31.25
Media façade P31.25Media façade P31.25Media façade P31.25Media façade P31.25

Media facades

Media façade P31.25

Large-format media façade P31.25 for an entire building. Brightness up to 6 000 nit, IP67, viewing distance from 62 m.

Model at a glance

Pixel pitch
P31.25
Brightness
up to 6 000 nit
Pixel density
1 024 dots/m² (32×32 per 1 m²)
Cabinet size
the mesh is assembled to the façade size; typical transport module 1000×1000 mm
IP rating
IP67
Refresh rate
≥3840 Hz
Power max/avg
1434/478 W/m²

Price on request

Cost depends on area, mounting structure and installation height. Send the dimensions and we will return a quote with a drawing.

Request a price

Media façade P31.25 — a large-format screen for an entire building. Pixel density 1 024 dots/m² (32×32 per 1 m²), brightness up to 6 000 nit, ingress protection IP67. It is viewed from a long distance, so the coarse pitch is not a drawback here but a way to cover a large area for sensible money.

Where it is used

  • entire building façades — advertising and architectural lighting
  • car parks and blank walls that need a large image seen from a distance
  • structures limited in weight and wind resistance
  • round-the-clock outdoor operation: sealed modules, −20…+60 °C range

Viewing distance

The manufacturer specifies a viewing distance of from 20 m. Any closer and the image breaks up into dots — a media façade is meant to be seen from the street, not from two steps away.

Construction and servicing

Ingress protection — IP67: the screen withstands direct rain, snow and hose-down cleaning. Operating temperature −40…+60 °C.

Power and load

Peak draw is 1434 W/m² (a white field at full brightness); with real content it is about 478 W/m². For a 6×3 m screen (18 m²) that means roughly 25.8 kW at peak and 8.6 kW in normal use. Power supply 110–240 V. In the technical specification we size the power lines by the peak rather than the average — otherwise the breaker trips on a white frame.

What the delivery includes

  • fully assembled cabinets — the modules, power supplies and receiving cards are already installed;
  • a video processor — chosen for the screen resolution so that there are enough ports with headroom to spare;
  • the supporting steel structure to suit the mounting location;
  • installation, commissioning and brightness tuning for the site;
  • operator training and handover of the firmware files;
  • warranty and service — a stock of modules and power supplies is held in Almaty.

We work out the exact price from your dimensions: it depends on the area, the mounting structure, the installation height and the control kit. Send us the size of the opening and a photo of the location and we will come back with a quotation and a layout drawing.

Full specification

Pixel pitch31.25 mm
Pixel configuration2727 RGB × 4 LEDs per pixel
Resolution32×32 pixels per 1 m² of screen
Pixel density1 024 dots/m² (32×32 per 1 m²)
Cabinet sizethe mesh is assembled to the façade size; typical transport module 1000×1000 mm
Weight≈12 kg/m²
Brightnessup to 6 000 nit
Viewing angle (H/V)140°/110°
Colour16.7 million colours (3-in-1 RGB)
Greyscale16 bit
Refresh rate≥3840 Hz
Scan typestatic (1/1) — one driver channel per pixel
Power consumption (max/average)1434/478 W/m²
Input voltage (AC)110–240 V
Module power supply, DCDC 24 V
Ingress protection (front/rear)IP67
Operating temperature−40…+60 °C
Operating humidity10 %~90 %
Service life≥50 000 hours
Recommended viewing distancefrom 20 m
Materialpolycarbonate (PC), black or clear housing
Transparency30–90 % — the façade behind the screen stays visible

A turnkey screen: quote, installation, launch.

Send us the dimensions and location — a quote today. WhatsApp around the clock.